12 51 320 Remove holder for engine wiring harnesses (N63) (X6 xDrive 50i)

Necessary preliminary tasks: 

• Switch off ignition.
• Remove ACOUSTIC COVER .

Release screws (1).

Tightening torque 12 51 3AZ .

Release coolant line and cable from the holder for the wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 12 51 3AZ .

Release cable from the holder for the wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.

Release lock (1) and remove all cables from holder.

Feed out holder and remove.

Courtesy of BMW OF NORTH AMERICA, INC.