63 12 015 Removing and installing/replacing left headlight (except adaptive headlight) (X6 2015-2019)
Attention!
Observe SAFETY INFORMATION ON HANDLING BULBS (EXTERIOR LIGHTS) .
Necessary preliminary work:
- Remove FRONT BUMPER PANEL .
Slacken both screws (1).
Tightening torque 63 12 1AZ .
Slacken both screws (1).
Tightening torque 63 12 1AZ .
Unlock and disconnect relevant connectors.
Remove headlight (2) forwards.
Installation note:
Observe BODY DIMENSIONS . .
Adjust HEADLIGHTS .
US version: CHECKING BLOCKING AT HORIZONTAL position