1111 Engine Block Technical Data (X6 M)
1111 ENGINE BLOCK, CYLINDER CRANKCASE S63T2 B44 TECHNICAL DATA SPECIFICATION
| Bore ø stage 0 | mm | 89.000+0.014 | ||
| Bore hole ø stage 1) | mm | 89.250+0.014 | ||
| Bore hole ø stage 2) | mm | 89.500+0.014 | ||
| Permitted out-of-round of cylinder bore (1). | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1). | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||