Removing and fitting (replacing) cowl panel cover (X6 M)

Necessary preliminary tasks: 

• Remove both WINDSCREEN WIPER ARMS .
• Remove both RIGHT MICROFILTER HOUSING COVER and LEFT MICROFILTER HOUSING COVER .

Release clips (1).

Feed out cover (2) towards top.

Installation note: 

Replace faulty clips (1) and associated grommets in body.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure grommets (1) are correctly seated on wiper pivots.

Grommets (1) for wiper pivots must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.