Removing and refitting/replacing ornamental grille (lower middle) in bumper trim panel (X6 M)

Necessary preliminary tasks: 

• Remove FRONT BUMPER PANEL .

Removal: 

Feed out wiring harness (1).

Release catches along line (2) and remove grille (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install ornamental grille (3) and fit into latch mechanisms along the line (2).

Secure wiring harness (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install front BUMPER PANEL .