Removing and installing/replacing gutter strip on windscreen (from build version 08/2016) (X6 M)

Unclip the gutter strip (1) upward from the clamps (2) beginning with the roof.

Feed gutter strip (1) out of the grommet (3).

Installation note:

Replace faulty clamps (2).

Feed the gutter strip (1) correctly into the grommet (3).

First, align gutter strip (1) with the roof, then clip it in.

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Replace gutter strip (1) after each dismantling.

Exception: New gutter strips (1) may only be removed once for correcting the position.