11 24 Connecting Rods and Bearings
TIGHTENING TORQUE SPECIFICATION - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Connecting rod bolt (new connecting rod with new connecting rod bolts) | N63 O1 | M9x1.25 | Release screws. Suction off crack surfaces. 1. Jointing torque 2. Jointing torque 3. Jointing torque 3. Angle of rotation |
5 Nm 20 Nm 30 Nm 75 ° |
| 2AZ 1. Special screw connection only with new connecting rod bolts. |
N63 O1 | M9x1.25 | 1. Jointing torque 2. Jointing torque 3. Jointing torque 4. Angle of rotation |
5 Nm 20 Nm 30 Nm 75 ° |
| 2. Loosen screws | 5. Loosen screw. 6. Jointing torque 7. Jointing torque 8. Jointing torque 9. Angle of rotation |
180 ° 5 Nm 20 Nm 30 Nm 75 ° |
||
| 3. Loosen screws | 10. Loosen screw. 11. Jointing torque 12. Jointing torque 13. Jointing torque 14. Angle of rotation |
180 ° 5 Nm 20 Nm 30 Nm 75 ° |
||
| 4. Loosen screws | 15. Loosen screw. 16. Jointing torque 17. Jointing torque 18. Jointing torque 19. Angle of rotation |
180 ° 5 Nm 20 Nm 30 Nm 75 ° |