51 11 Front bumper
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper to air duct, top | F15/F16/F85/F86 | 6 Nm | ||
| 2AZ Bumper to side wall | F15/F16/F85/F86 | 5 Nm | ||
| 3AZ Bumper to underbody panelling | F15/F16/F85/F86 | 4 Nm | ||
| 4AZ Support to deformation element | F15/F16/F86 | Screw | Jointing torque Angle of rotation |
56 Nm 180 ° |
| Nut | 56 Nm | |||
| 5AZ Deformation element to engine support | F15/F16 | 27 Nm | ||
| 6AZ Deformation element to headlight support | F15/F16 | 10 Nm | ||
| 7AZ Holder to support | F15 | 5 Nm | ||
| 8AZ License plate baseplate to bumper | F15/F16/F85/F86 | 0.8 Nm | ||
| 9AZ Car registration number to bumper | F15 | 1 Nm | ||
| 10AZ Car registration number to bumper (thread repair) | F15 | 4 Nm | ||
| 11AZ Strut to deformation element, top | F15 | 27 Nm | ||
| 12AZ Strut to support | F15/F16/F85/F86 | 8 Nm |