51 24 080 Removing and installing/replacing drive unit for tailgate lock

Necessary preliminary tasks:

Lift off cover (1), slacken screw and remove handle (2).

Tightening torque 51 24 6AZ .

Lever out cover (3) and release screw underneath.

Tightening torque 51 49 9AZ .

Installation note:

Replace faulty covers (1 and 2).

Fig 1: Identifying Handle And Covers

Courtesy of BMW OF NORTH AMERICA, INC.

Detach Bowden cable (1 and 2).

Fig 2: Detaching Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken screws (1) and carefully remove drive (2).

Tightening torque 51 24 5AZ .

Fig 3: Identifying Drive And Screws

Courtesy of BMW OF NORTH AMERICA, INC.