51 11... Remove and install/replace cover for headlight cleaning system on left or right

Pull out washer jet (1) by cover (2).

IMPORTANT: When releasing cover (2), grip washer jet (1) firmly and then allow to slide back slowly (Risk of damage).

Release cover (2) sideways from washer jet (1).

Fig 1: Releasing Cover Sideways From Washer Jet

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) on cover (2) must not be damaged.

Fig 2: Identifying Guides On Cover

Courtesy of BMW OF NORTH AMERICA, INC.