11 22 510 Removing and installing/replacing flywheel (transmission removed) (N63)

Special tools required:

Necessary preliminary tasks:

Release flywheel screws in area (1).

Remove flywheel (2).

Installation note:

Clean thread of flywheel bolts in crankshaft.

Flywheel (2) is secured with an alignment pin.

Fit flywheel (2).

Fig 1: Identifying Flywheel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Fit new flywheel screws.

Tightening torque 11 22 1AZ .