Removing and installing/replacing trim panel for luggage compartment floor (X5 M)

Push retaining spring (1) to end of gas pressure spring.

Remove gas pressure spring from ball head.

Firmly pull luggage compartment floor (2) towards the rear and thereby detach it from hinges (3).

NOTE: Removal is easier the flatter the luggage compartment floor (2) is positioned.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1).

Remove mounting plate (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2) and retaining hook (3).

Courtesy of BMW OF NORTH AMERICA, INC.