Removing and refitting/replacing power window switch trim (X5 M)

Necessary preliminary tasks: 

• Remove front DOOR TRIM PANEL .

  Release screws (1).

  Unclip power window switch trim (2) from clamps (3) in direction of arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Clips (1) must not be missing or damaged.

Replacement: 

Swap over power window switch (2). Refer to REMOVING AND INSTALLING/REPLACING POWER WINDOW SWITCH (FRONT PASSENGER SIDE) .

Swap over BOOT/TAILGATE RELEASE SWITCH (3) .

Courtesy of BMW OF NORTH AMERICA, INC.