Removing and installing/replacing Automatic Soft Close drive on tailgate (Automatic Soft Closing) (X5 M)

Necessary preliminary tasks: 

• Remove TRIM FOR REAR LID LOWER SECTION .

  Unfasten plug connection (1) and disconnect.

  Disconnect Bowden cable (2).

  Installation note: 

  Make sure the Bowden cable (2) is fitted correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Remove rubber grommets (1) of tailgate (push towards bottom).

  Carefully remove engine (2) with cable (3) and Bowden cable (4).

  Courtesy of BMW OF NORTH AMERICA, INC.