Removing and installing/replacing the ornamental grille in bumper panel (X5 M)

Necessary preliminary work: 

• Remove the TRIM FOR THE BUMPER PANEL  at the bottom rear.

Removal: 

Release latch mechanisms (1) and remove center ornamental grille (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Engage the middle ornamental grille (2) In the latch mechanisms (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install the TRIM FOR THE BUMPER PANEL  at the bottom rear.