11 28 025 Removing and installing/replacing deflection pulley (N47 D20 O1)

Necessary preliminary tasks: 

• Remove ALTERNATOR DRIVE BELT .

Unclip protective cap (1) with a suitable tool.

Fig 1: Identifying Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: 11 00 4AZ .

Remove deflection pulley (2).

Fig 2: Identifying Deflection Pulley And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.