11 14 010 Replacing sealing cover for vacuum pump (N52T)

Special tools required:

Necessary preliminary work:

NOTE: For purposes of clarity, graphics show alternator and power steering pump removed.

Secure special tools 11 8 535 , 11 8 531 , 11 8 537 and special tool 11 9 266 .

Fig 1: Removing Alternator And Power Steering Pump Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Position special tool 11 8 537 by hand on sealing cap.

Screw in special tool 11 8 534 .

NOTE: The sealing cap is pressed out diagonally during this operation

Fig 2: Screwing Special Tool 11 8 534

Courtesy of BMW OF NORTH AMERICA, INC.

Screw in new sealing cap (1) with special tools 11 8 532 and 11 8 533 until flush with crankcase upper part.

Fig 3: Screwing Sealing Cap With Special Tools 11 8 532

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.