17 11 000 Removing and installing radiator (N20, N55, N52T, N47 D20 O 1, N57 D30 O/T 1, B47)
WARNING:
Risk of scalding!
Only carry out repair work on the cooling system when the engine has cooled down.
Only carry out repair work on the cooling system when the engine has cooled down.
IMPORTANT:
Wear safety goggles and protective gloves.
Necessary preliminary tasks:
- Remove fan cowl . See 17 11 035 REMOVING AND INSTALLING/REPLACING FAN COWL WITH ELECTRIC FAN (N47 D20 O1, B47) or 17 11 035 REMOVING AND INSTALLING/REPLACING FAN COWL WITH ELECTRIC FAN (N20, N55, N52T) .
- Drain COOLANT .
- Release and detach coolant hoses from radiator
Bolts (1) on radiator on left and right.
Tightening torque: 17 10 4AZ .
Feed out radiator towards rear and remove by pulling upwards.
Reassemble the vehicle.
Check COOLING SYSTEM for leaks.