51 33 Power windows, front
TIGHTENING TORQUE SPECIFICATION - POWER WINDOWS, FRONT
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Flat motor to power window regulator | F01/F02/F04/F10/F11/F15/F16/F18/F85/F86 | 5.5 Nm | ||
| F06/F12/F13 | 3.5 Nm | ||||
| 2AZ | Window regulator to door | F01/F02/F03/F04/F10/F11/F18 | Replace screws | 11.8 Nm | |
| F15/F16/F25/F26/F85/F86 | 9.5 Nm | ||||
| 3AZ | Holder to inner door panel | F01/F02/F04/F10/F11/F18 | 5.5 Nm | ||
| 4AZ | Window regulator to holder | F03 | Hexagon screw | 18.5 Nm | |
| 5AZ | Door window glass to power window regulator | F06/F12/F13 | Multipoint screw | 12 Nm | |
| With special tool 51 3 240 and torque wrench (long lever arm) | 9 Nm | ||||
| 6AZ | Window regulator to door body | F06/F12/F13 | M6 | 9.5 Nm | |
| 7AZ | Power window regulator to door shell (adjusting element for preload) | F06 | M8 | 16 Nm | |
| F12/F13 | M8 | 19 Nm | |||