51 47... Removing and installing/replacing left or right capping in luggage compartment

Necessary preliminary tasks: 

• Remove TRIM PANEL FOR ROOF PILLAR  (C-pillar) at rear
• Remove TRIM PANEL FOR ROOF PILLAR  (D-pillar) at rear

Release screw (1).

Installation note: 

Replace screw (1).

Tightening torque 72 11 21AZ .

End fitting is coded against incorrect installation.

Fig 1: Locating Luggage Compartment Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed capping (3) out of seat belt strap (2) and remove.

Fig 2: Identifying Seat Belt Strap, Capping And Screws

Courtesy of BMW OF NORTH AMERICA, INC.