13 71 031 Remove intake neck for intake silencer housing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 BMW X1, 2021 BMW X1, 2020 BMW X1, 2019 BMW X1, and 2018 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.
Removal:
Unscrew nuts (1).
Release lock (2).
Feed out intake port (3) and remove.
Installation:
Install intake port (3).
Fasten lock (2).
Tighten down nuts (1).
Tightening torque 13 71 1AZ .