51 61 Body reinforcement
51 61 BODY REINFORCEMENT - TIGHTENING TORQUE SPECIFICATIONS
| 1AZ Torsion strut to mounting | F45/F46/F48/F49/F54/F52/F60 | M12X1.5X48 | Replace screws Joining torque Angle of rotation |
100 Nm 90° |
| 2AZ Cross-brace to bulkhead | F45/F46/F48/F49/F60/F52 | Replace nut Joining torque Angle of rotation |
56 Nm 45° |
|
| 3AZ Strut brace to support bearing | F45/F46/F48/F49/F60/F52 | Replace screw Joining torque Angle of rotation |
56 Nm 90° |
|
| 4AZ Front strut brace to shock tower (dome-dome-strut) | F48/F49/F60 | Replace screw Joining torque Angle of rotation |
28 Nm 180° |
|
| 5AZ Torsion strut to mounting | F57 | Hexagon screw M12X1.5X48 | Replace screws Joining torque Angle of rotation |
100 Nm 90° |
| Torx screw M10X16 | 38 Nm |
| Front connecting support on body | ||
| M10x18 | Tightening torque | 56 Nm |
| Rear connecting support on body | ||
| M8x18 | Tightening torque | 28 Nm |