51 71 071 Removing and installing/replacing upper bulkhead cover

Preliminary work: needed: 

• Remove WINDSHIELD PANEL COVER  (front section)

Removal: 

Unscrew the screws (1).

Feed out cover (2) towards top.

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Feed out cover (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in cover (2).

Tighten down screws (1).

Tightening torque 51 71 9AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Install cover (2).

Tighten down screws (1).

Tightening torque 51 71 9AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install WINDSHIELD PANEL COVER  (front section)