REP-TAT-P-5171-02 Installing the front wheel arch cover
- Guide the wheel arch cover (1) in.
- Tighten all bolts and nuts (arrows).
TIGHTENING TORQUE SPECIFICATION
| Wheel arch cover to body | ||
| Plastic nut | Tightening torques | 2, 6Nm |
| Screw | Tightening torques | 2, 6Nm |
Tightening torque
| Wheel arch cover to body | ||
| Screw | Tightening torque | 2, 5Nm |
TIGHTENING TORQUE SPECIFICATION
| Wheel arch cover to body | ||
| Plastic nut | Tightening torque | 3Nm |