51 46 026 Removing and installing or replacing front air outlet trim grille

Necessary preliminary tasks: 

• Remove REAR SEAT
• Remove ARMREST FOR REAR SEAT BACKREST
• REMOVE BOTH COVERS FROM THE ROLLOVER BAR

Release screws (1) on backrest.

Tightening torque 52 24 7AZ .

The screws (2) need not be loosened.

Fold the backrest towards the front.

Fig 1: Identifying Screws On Backrest

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws at marked points.

Remove the ornamental grille (1) towards the top.

Fig 2: Removing Ornamental Grille

Courtesy of BMW OF NORTH AMERICA, INC.