LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> M5 Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine - Variable Valve Timing Control System (VANOS), Intake Plenum, Turbocharger, Water Pump, Thermostat, Coolant Lines, EGR Valve, EGR Cooler, Oxygen Sensors - Repair >> Thermostat And Coolant Lines >> N57 Diesel Engine >> 11 53 000 Removing and installing or replacing coolant thermostat (N57 Diesel)

11 53 000 Removing and installing or replacing coolant thermostat (N57 Diesel)

Necessary preliminary tasks: 

Graphic shows N47.

Release coolant hose from coolant thermostat.

Release screws (1) on thermostat housing (on N57 Diesel: 3 screws).

Tightening torque: 11 00 2AZ .

Remove thermostat housing.

Installation note: 

Replace gasket.

Fig 1: Identifying Screws On Thermostat Housing
G09925006Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

FILL and bleed cooling system.

scientia non olet · About LEMON Manuals