LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> M4 Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair -- M4 (F82 & F83) >> 51 13 Trim Parts, Covers, Handle Strip >> Removing and installing/replacing cowl panel cover (M4 Coupe, M4 Convertible)

Removing and installing/replacing cowl panel cover (M4 Coupe, M4 Convertible)

Necessary preliminary tasks: 

Release expanding rivets/clips (1) on left/right.

Turn snap fastener (2) approx. 90° counterclockwise.

Lift out cover (3).

Replace damaged expanding rivets/clips (1).

Check cover (3) for correct fit.

Close snap fasteners (2) from the middle.

The fastener is closed if the arrow tips point to each other.

G10096921Courtesy of BMW OF NORTH AMERICA, INC.