Removing and installing/replacing center console cover (M4 Coupe, M4 Convertible)

Special tools required: 

• 00 9 325

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks: 

• REMOVE DECORATIVE TRIM ON CENTER CONSOLE .
• Remove CENTER CONSOLE OPERATING UNIT .

Release screws (1).

Release cover (2) with special tool 00 9 325 from clamps (3).

Slightly raise the cover (2) and disconnect associated plug connection.

Feed out cover (2) to the top/rear.

Installation note: 

Ensure correct cable routing.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

When installing make sure springs (1) are not disengaged.

Replace faulty clamps.

Replacement: 

• Modify charging socket (2)
• Modify INTERIOR AERIAL (3)

Courtesy of BMW OF NORTH AMERICA, INC.