LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> M235i 2D Convertible, Standard Trans >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the M235i 2D Convertible, Automatic Trans, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All1.8B
Front or Rear,Both Sides1.0B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed Brake System.
One0.3B
Combination Procedure: BRAKE SYSTEM: Bleed:
0.9B
Combination Procedure: CALIPER: Overhaul:
4 Piston,OneDOES NOT include Bleed System.0.7B
Single Piston,OneDOES NOT include Bleed System.0.3B
Combination Procedure: CALIPER: Replace:
Front,OneDOES NOT include Bleed System.0.2B
Rear,OneDOES NOT include Bleed System.0.1B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace:
Each,Front0.2B
Each,Rear0.3B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side0.4B
Combination Procedure: WHEEL BEARING: Replace:
Front,Both1.4B
Front,One Side0.8B
Rear,Both5.4B
Rear,One Side4.4B