63 17 070 Removing and installing/replacing left fog light

IMPORTANT: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS)

Necessary preliminary tasks:

Fold wheel arch cover (1) back.

Unfasten plug connection (2) and disconnect.

Fig 1: Identifying Wheel Arch Cover And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 63 12 2AZ .

Remove fog light (2) out of bumper panel (3) in direction of arrow.

Fig 2: Removing Fog Light Of Bumper Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) on fog light (2) must not be damaged or missing.

Fig 3: Identifying Guides On Fog Light

Courtesy of BMW OF NORTH AMERICA, INC.

On replacement of fog light or bumper panel at front: