11 21 Crankshaft With Bearing
N55 ENGINE (2016-2018):
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Torsion damper (hub) to crankshaft (central bolt 12.9) | N55 | M18x108 | Replace screw Lightly oil screw and thread Jointing torque Torque angle |
100 Nm 270° |
S55 ENGINE (2019-2022):
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torsion damper (hub) to crankshaft (central bolt 12.9) | S55 | M18x108 | Replace screw Lightly oil screw and thread Jointing torque |
100 Nm |
| Angle of rotation | 270° |