Removing and installing/replacing trim panel for pedal mechanism (2016-2022)

Release screw connection (1).

NOTE: Version with knee airbag: Unscrew nuts (1).

Tightening torque 51 45 8AZ .

Release trim panel (2) at clamps (3).

Lower trim panel (2) slightly and disconnect plug connections behind.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clamps (1) and guides (2) must not be damaged.

Feed guides (2) correctly into the corresponding holder in the vehicle.

Replacement (depending on version):

Courtesy of BMW OF NORTH AMERICA, INC.