33 17 Rear axle differential mountings
TIGHTENING TORQUE SPECIFICATION - REAR AXLE DIFFERENTIAL MOUNTINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear differential to rear axle carrier, front | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | FOLLOW REPAIR INSTRUCTION
. Replace screws. Jointing torque Angle of rotation |
100 Nm 90 ° |
| F25/F26 | M12 | Follow repair instruction. | 100 Nm | |
| 2AZ Rear differential to rear axle carrier, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | FOLLOW REPAIR INSTRUCTION
. Replace nut. |
175 Nm |
| F25/F26 | M14 | Follow repair instruction. Replace nut. |
165 Nm | |
| 3AZ Vibration absorber on front right rear axle final drive | F10/F11 | M12 | Replace nut. | 56 Nm |
| 4AZ Vibration absorber to vibration absorber holder | F25/F26 | M14 | 100 Nm | |
| 5AZ Front adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | Replace screws. | 120 Nm |
| 6AZ Rear adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | 120 Nm |