343050 Holding sleeve Mechanical tool

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Assembly sleeve) with a diameter of 22 mm to insert piston and sleeve into the tandem brake master cylinder

Fig 1: Identifying Holding Sleeve (343050)

Courtesy of BMW OF NORTH AMERICA, INC.