232060 Puller AM

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 BMW M6 Gran Coupe, 2018 BMW M6 Gran Coupe, 2017 BMW M6 Gran Coupe, 2016 BMW M6 Gran Coupe, and 2015 BMW M6 Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball bearing extractor 6306) For pulling out the grooved ball bearing from the drive shaft and output shaft

Consisting of:

1 = 0491554 Claw

NOTE: (Claw for Rillex 6306 (8 units))

Fig 1: Identifying Puller (232060)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0491555 Holding sleeve

NOTE: (Union sleeve)

3 = 0491556 Spindle

NOTE: (Pressure spindle)