51 16 365 Removing and installing/replacing glovebox cover

Necessary preliminary tasks: 

• Remove RIGHT GLOVEBOX WITH HOUSING .

Release locking pin (1) and press out of glovebox guide (2) in direction of arrow.

Fig 1: Releasing Locking Pin And Glovebox Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove glovebox cover (2) from glovebox housing (3).

Fig 2: Identifying Glovebox Cover, Glovebox Housing And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure glovebox cover (1) is correctly guided.

Fig 3: Identifying Glovebox Cover

Courtesy of BMW OF NORTH AMERICA, INC.