52 10 Front seats
TIGHTENING TORQUE SPECIFICATION - FRONT SEATS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Seat to floor panel | F01/F02/F03/F04/F07/F10/F11/F18 | M 10 (trilobular) | Replace Powerlock screw (self-locking) | 43 Nm |
| 2AZ Backrest frame to seat frame | F01/F02/F03/F04/F07/F10/F11/F18 | (trilobular) | Replace Powerlok screw | 31 Nm |
| 3AZ Active head restraint - Sliding rails with gas cartridge |
F01/F02/F03/F04/F07/F10/F11/F18 | 8 Nm | ||
| 4AZ Carrier section for electr. operating unit | F01/F02/F03/F04/F07/F10/F11/F18 | 8 Nm | ||
| 5AZ Cover to seat | F01/F02/F03/F04/F07/F10/F11/F18 | 4 Nm | ||
| 6AZ Seat rails to seat frame | F01/F02/F03/F04/F07/F10/F11/F18 | 27 ±3 Nm | ||
| 7AZ Adjusting switch to cover | F01/F02/F03/F04/F07/F10/F11/F18 | 2 Nm | ||
| 8AZ Seat angle adjuster to seat mechanism | F01/F02/F03/F04/F07/F10/F11/F18 | M8x30 | 27 ±3 Nm | |
| 9AZ Seat depth adjustment | F01/F02/F03/F04/F07/F10/F11/F18 | 3 +0.5 Nm | ||
| 10AZ Transmission for backrest upper section adjustment | F01/F02/F03/F04/F07/F10/F11/F18 | 2.5 +0.5 Nm | ||
| 11AZ Cushion carrier, seat depth adjustment | F01/F02/F03/F04/F07/F10/F11/F18 | 6 Nm | ||
| 12AZ Retaining screw on head restraint | F01/F02/F03/F04/F07/F10/F11/F18 | 4.0 ± 0.2 Nm |