51 35 Power windows, rear
TIGHTENING TORQUE SPECIFICATION - POWER WINDOWS, REAR
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Flat motor to power window regulator | F01/F02/F04/F10/F11/F15/F16/F18/F85/F86 | Oval-head screw for thermoplastic | 5.5 Nm | |
| 2AZ Window regulator to door | F01/F02/F04/F10/F11/F18 | Oval-head screw, self-locking | 11.8 Nm | |
| F15/F16/F25/F26/F85/F86 | 9.5 Nm | |||
| 3AZ Side window, rear, non-opening (bottom) | F01/F02/F04/F10/F11/F18 | 7.6 Nm | ||
| 4AZ Window frame trim (B-pillar) | F01/F02/F04/F10/F11/F18 | 2.5 Nm | ||
| 5AZ Trim, window guide web - Side window, rear | F01/F02/F04/F10/F11/F18 | 3 Nm | ||
| F15/F16/F85/F86 | 5 Nm | |||
| 6AZ Roller sunblind | F01/F02/F04 | 9 Nm | ||
| 7AZ Window frame trim (B-pillar) to inner door panel | F01/F02/F04/F15/F16/F85/F86 | M5x30 | Oval-head screw | 2.5 Nm |
| F01/F02/F04 | ST4.8x19 | self-tapping screw | 2 Nm | |
| 8AZ Guide rail to closing plate | F01/F02/F04 | Oval-head screw for thermoplastic | 3 Nm | |
| F01/F02/F04 | ST4.8x19 | self-tapping screw | 2 Nm | |
| 9AZ Roller shell | F01/F02/F04 | Oval-head screw for thermoplastic | 3 Nm | |
| F01/F02/F04 | Flat-head screw | 8 Nm | ||
| 10AZ Window guide rail rear, to window partition web | F01/F02/F04 | 8 Nm | ||
| 11AZ Holder to inner door panel | F01/F02/F04/F10/F11/F18 | 5.5 Nm | ||
| 12AZ Window regulator to door | F03 | Hexagon screw | 18.5 Nm | |
| 13AZ Side window, rear, non-opening (top) | F10/F11/F18 | 2.5 Nm | ||
| 14AZ Window frame trim (C-pillar) | F11 | 1.5 Nm | ||
| F15/F16/F85/F86 | 2.0 Nm |