51 11 Front bumper
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper to air duct, top | F01/F02/F03/F04/F06/F07/F10/F11/F18 | 4 Nm | ||
| 2AZ Deformation element, top or bottom, to vertical connection | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 3AZ Deformation element to engine support | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws Jointing torque Angle of rotation |
80 Nm 270 ° |
| 4AZ Support to deformation element | F01/F02/F03/F04/F06/F07/F10/F11/F18/F12/F13 | Replace screws and nuts | 27 Nm | |
| F25/F26 | M8 | 20 Nm | ||
| 5AZ Carrier to deformation element, bottom | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 6AZ Deformation element, bottom, to adapter plate, front axle carrier | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 7AZ V-support to deformation element, top | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 8AZ Car registration number to bumper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1 Nm | ||
| 9AZ Car registration number to bumper (thread repair) | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M5 | 4.5 Nm | |
| 10AZ Carrier, bottom, to deformation element, bottom | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 11AZ Bumper to side wall | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 3 Nm | ||
| 12AZ Bumper to radiator air duct | F25/F26 | 5 Nm |