LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> ActiveHybrid 5 >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System - Repair >> Engine Radiator With Attachment >> 17 11 000 Removing And Installing Radiator (N55 Hybrid)

17 11 000 Removing And Installing Radiator (N55 Hybrid)

WARNING: Risk of scalding!
Only perform this repair work after engine has cooled down.
WARNING: High-voltage system - danger to life!
The following points must be strictly observed prior to starting work: 
IMPORTANT: Wear safety goggles and protective gloves.

Necessary preliminary tasks: 

Release screws (1) on left and right from cover (3).

Tightening torque: 17 10 1AZ .

Release screws (2) behind sealing lip.

Tightening torque: 17 10 1AZ .

Lift out cover (3).

Fig 1: Screws And Cover
G06889272Courtesy of BMW OF NORTH AMERICA, INC.

Remove radiator (1) towards top.

Fig 2: Removing Radiator
G09918175Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Check COOLING SYSTEM  for leaks.