12 52 Engine wiring harness
TIGHTENING TORQUE SPECIFICATIONS - ENGINE WIRING HARNESS (N74)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Holder to crankcase | N74 | M8 | 21 Nm | |
| 2AZ Holder at the intake silencer housing | N74 | K50 | 4.6 Nm | |
| 3AZ Ground for ignition coils | N74 | M5 | 3 Nm | |
| 4AZ Holder at the cylinder head | N74 | M6 | 10 Nm | |
| 5AZ Cable channel to cylinder head cover | N74 | M6 | 10 Nm | |
| 6AZ Front shaft on the gear case cover | N74 | M6 | 10 Nm | |
| N74 | M5 | 4.5 Nm |