Condition for fault identification

Voltage precondition:

None

Temperature precondition:

The ambient temperature at engine start must be higher than -7.5°C

$(C TAM MIN TIA PLAUS DIAG) and lower than 35.3°C

$(C_TAM_MAX_TIA_PLAUS_DIAG).

Time precondition:

Time after engine start > 60 s

$(C_T_DLY_TIA_THR_DIAG)

Other preconditions:

Cruise >40 km/h $(C VS MIN TIA PLAUS DIAG) for >120 s

$(C T VS MIN TIA PLAUS DIAG), air mass <500 mg/stroke

$(c MAF MAX TIA PLAUS) for >20 s

$(C_T_DLY_MAF_MAX_TIA_PLAUS)