Condition for fault identification

Voltage condition:

None

Temperature condition:

AAT at engine start must be higher than -7, 5°C

$(C_TAM_MIN_TIA_PLAUS_DIAG) and lower than 35, 3°C

$(C_TAM_MAX_TIA_PLAUS_DIAG),

Time condition:

Time after engine start > 60 s $(C T DLY TIA IM DIAG)

Other conditions:

speed >40 km/h $(C VS MIN TIA PLAUS DIAG) for >120 s

$(C_T_VS_MIN_TIA_PLAUS_DIAG)