Secure the wishbone on the top left and right on the swivel bearing

NOTE: Perform the steps on the right and left side.

Secure the top wishbone on the swivel bearing

Position upper wishbone (3) on the swivel bearing (4) .
Replace the screw (2) and the nut (1) .
Parts: Bolt, nut
Insert screw (2) .
The screw (2) must be positioned in the groove of the pin from the top control arm (3) .

(F) = driving direction
Tighten nut (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Upper wishbone to swivel bearing
M10 Replace screw and nut.	Tightening torque	56 Nm