Install the reinforcement strut on the engine mount on the left and right
NOTE:
Perform the steps on the left and right side.
Install the reinforcement strut on the engine mount
- Position the reinforcement strut (3) .
- Insert bolts (1) and (2) .
- Tighten down screw (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Engine mount reinforcement strut on body | ||
|---|---|---|
| M8 | tightening torque | 28 Nm |
- Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Engine mount reinforcement strut on front subframe | ||
|---|---|---|
| M8 | tightening torque | 28 Nm |