Removing the blow-off valve of cylinder bank 2

Precondition 

• Ignition is switched off.

Preliminary work 

• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING THE COVER PANEL OF THE LEFT DME CONTROL UNIT .
• Refer to RELEASING LEFT CHARGE AIR LINE PARTIALLY .
• Refer to REMOVING THE CLEAN AIR PIPE OF CYLINDER BANK 2 .

• Unlock plug connection (1) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screws.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screws.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screws.
• Pull out the blow-off valve of the cylinder bank 2 and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.