Installing the electrical vacuum pump

• Install the electrical vacuum pump (1)  in the holder in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the vent hose (1)  in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position electrical vacuum pump with holder (2)  .
• Replace screws (1)  .

  Parts:  screws.

• Insert screws (1)  and tighten.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Electrical vacuum pump holder to body
  M6 Replace screws.	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the vacuum line into the holders (3)  .
• Position snap fastener (2)  and lock.
• Connect connectors (1)  and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE UNDERSHIELD ON THE RIGHT FRONT SIDE .
• Refer to MOUNTING THE WHEEL .
• Refer to RESETTING THE ELECTRICAL VACUUM PUMP DURATION .