Remove Trunk Lid
Preliminary work
- Refer to REMOVING TRUNK COMPARTMENT LIGHT ON TRUNK LID .
- Refer to REMOVE THE POWER TAILGATE SWITCH .
- Refer to REMOVE TAILGATE TRIM PANEL .
- Refer to REMOVE THE CENTER TAILGATE TRIM STRIP .
- Refer to REMOVE REAR VIEW CAMERA .
- Refer to REMOVING THE TRUNK LID HANDLE .
- Refer to REMOVING THE REAR TRIM .
- Refer to REMOVING BOTH TAIL LIGHTS FROM THE TRUNK LID .
- Refer to REMOVE THE TRIM PANEL OF THE TAILGATE HINGE ON THE LEFT .
- Refer to REMOVING BOTH STOP PADS .
- Refer to REMOVE STRIKER FOR TAILGATE LATCH .
- Refer to REMOVING THE EMBLEM .
- Feed out cable (1) for rearview camera from the trunk lid.
- Unlock lugs (1).
- Remove buzzer (2) and release plug connection.
- Loosen harness (1) at the marked locations and set it aside.NOTE: RISK OF DAMAGE
Mechanical effects.
Paint damage.- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
- Loosen screws (1).
- Remove trunk lid (2).