Installing The Engine Compartment Lid Right Hinge

• Position the engine compartment lid hinge (1) as per the available screw marks.
• Tighten down screws (2).

  TIGHTENING TORQUE SPECIFICATIONS 

  Engine compartment lid hinge to body
  screw	Tightening torque	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the cable bracket (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALL THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALL THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
• Refer to INSTALL LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE GAS PRESSURE SPRING FOR HOOD .
• Refer to INSTALL HOOD .
• Refer to CHECK THE GAP DIMENSION OF THE HOOD .
• Refer to INSTALLING THE NOZZLE CHAIN .