5175 UNDERSHIELD
5175 TIGHTENING TORQUE OVERVIEW
| Bracket to thrust arm | ||
| Screw | Tightening torque | 3 Nm |
| Diffuser/undershield | ||
| Nuts and screws | Tightening torque | 3 Nm |
| Heat shield at tunnel | ||
| Nut | Tightening torque | 2.5 Nm |
| Retaining plates for vehicle underbody cover | ||
| Sheet metal nut/plastic nut Replace nuts. |
Tightening torque | 3 Nm |
| Underbody planking on body | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Underbody planking on body | ||
| Hexagon screw | Tightening torque | 2.6 Nm |
| Undershield | ||
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |